Environmental Solution Services

Product Details:

We are the prominent organization of this domain engaged in offering a wide spectrum of Environment Management Services. Our services include water and wastewater treatment models, sewage facilities, and better solution to offer a clean and health environment to the population. The scientists opt for coastal, topography, and soil study taking into consideration the power and engineering studies. They expand air pollution control and modeling solution to prevent the future generation. Clients can get in touch with us to know the reasonable price for charged by us for calibration.

Features:

• Pacific spectrum environmental research & consultancy
• Hazardous waste generator registration
• Permit to operate

Applications:

• Surgical
• Engineering
• Textile & Rubber

As waste management consultants, we can assist your business with site selection, landfill engineering and design, landfill permitting, and construction of a solid waste management facility. We offer complete environmental and civil engineering services, geologic services, environmental consulting, and construction management services that will take your project to completion.

Landfill Location & Assessment Studies

Selecting a site that meets the right balance of size, zoning, accessibility, location, zoning, and environmental suitability is important to reduce future costs and problems.

Local Planning & Zoning Assistance Developing a new landfill sometimes requires a change in zoning or special use exceptions in cases where the local zoning has not anticipated the development of a solid waste landfill or rubbish disposal site. We have been through this process for several clients and know the keys to success.

Construction Quality Assurance

Our engineers and field technicians are experienced in construction QA/QC for various types of liners, leachate collection systems, gas venting systems, and remediation systems.

Air Quality Permitting Title V air permitting requirements now apply to many MSW landfills. Now new greenhouse gas regulations are being added to the mix for landfills. We can help you sort out what permits are required and get the needed permits.

Product Details:

What is this service?

• Stack emission testing is also known as Source Sampling Test, Emission Test, Performance Test or Compliance Test. In this service, the test methods adopted depend upon the type of pollutants and industry. This type of emission testing is performed while the pollution control equipment is operating at conditions where there is highest emission.

Why it is required?

• Every industry has to report their stack emission level released into the atmosphere regularly. The stack emission testing is important to determine a facility's compliance with emission limits.These tests are done by the industrial clients to be in accordance with the Environmental Permitting Regulations.These tests are basically carried out to determine a pollutant concentration, emission rate or parameter. This testing includes testing of benzene testing, toulene testing, heavy metal testing in air, VOC emission monitoring, VOC testing and analysis.

Following tests are performed for Stack Emission Testing:

• Temperature
• Carbon dioxide
• Velocity
• Acid Mist (H2SO4)
• Flow rate
• Heavy metals (as Pb)
• Particulate matter
• Volatile Organic Compounds as per EPA 502/524 mix
• Sulphur dioxide
• Oxides of Nitrogen
• Carbon monoxide
• Oxygen

Product Details:

Description:

• With the comprehensive industry knowledge of allied domain, we are engaged in presenting a superior quality range of Dust Collecting System. This sander with dryer is manufactured meeting the industry standards, which make it dependable for rubbing and polishing liquids dry paint on the walls and various other structures. Operator friendly control panel and easy to move and handle spray is widely used in residential, commercial, and industrial arenas. It is an electric sander with dryer with piston operator system. The maximum flow is 2.7 RPM/ second.

Features:

• Electric pressure display
• Dimensionally accurate hose and nozzle
• High performing and easy to handle

Applications:

• Bag filling and emptying: animal feed, building products, additives
• Blast cleaning: metals, equipment
• Conveying, mixing, blending: all powders, pellets and granulated material
• Crushing, screening, sieving: from quarried minerals to pharmaceutical powders
• Grinding, polishing, finishing: metals and other materials
• Foundry processes: melting and sand reclamation to fettling and finishing
• Milling: food and feed raw materials, grains, pulses
• Cutting and shaping: laser, plasma, mechanical sawing
• Powder coating: surface finishing, decorative coatings
• Hot metal processes: galvanizing, metal spraying

Product Details:

Features:

• Stringent Quality Checks
• Timely Delivery
• Customer-Centric Approaches
• Ethical Business Practices
• Qualitative Testing
• Technically Advanced Technology
• Cost-Effective Rates

Wastewater Treatment – Do More With Less
Energy and chemical costs are rising while regulations are getting tighter. At Hach, we understand and embrace this challenge and continuously use your feedback to drive new product innovation and new applications for existing products to drive down operating costs.

With the increase in Nitrogen and Phosphorous in water bodies, nutrient removal and monitoring are becoming increasingly more regulated while at the same time more costly. Let Hach help you see how to save energy and chemical costs with the most extensive portfolio of online and lab instrumentation for your nutrient monitoring needs.

Product Details:

Features:

• Stringent Quality Checks
• Timely Delivery
• Customer-Centric Approaches
• Ethical Business Practices
• Qualitative Testing
• Technically Advanced Technology
• Cost-Effective Rates

Stack monitoring is referred as Stack emission testing, stack emission monitoring or stack sampling. It is a process to measure emission of industrial waste or pollutants emitted into atmosphere. The pollutants emitted from stack can be solid, gaseous, liquid organic or inorganic.
Stack is nothing but chimney which is used to disperse the hot air at a great height, emissions & particulate matters that are emitted from the various types of stacks like boiler, flue gas etc. At these heights the polluted air disperse in a very large area so that concentrations at ground are within permissible limits and not harmful for humans, animals and vegetation. There are several types of flue-gas stack based on fuel injections. Eg. DG set stack, flue gas stack, process stack, furnace stack, boiler stack, chimney etc.

Product Details:

What is this service?

• The waste water testing services generally involve analysis of sample on its toxicity level. The waste water coming from the industries needs to be treated before being discharged in to water bodies. The type of treatment depends upon the type and level of contaminants present in the waste water.

Following are parameters on which waste water is tested before deciding upon the type of treatment:

• Conductivity
• Mercury content
• Acidity
• Total dissolved solids
• Settle-able solids
• Hazardous chemicals

Why it is required?

• It is mandatory to treat the wastewater before discharging it into any kind of water body. The method of treating the water depends upon its toxicity level and type of contaminants dissolved in it. For all these reasons, industrial clients perform testing on wastewater.

Following tests are performed for Waste Water Testing:

• Colour
• Chlorine Residual
• Odour
• Ammoniacal Nitrogen as NH3.N
• Total Dissolved Solids (Inorganic)
• Total Kjeldahl Nitrogen
• pH Value
• Free Ammonia as NH3
• Conductivity (µmhos/cm)
• BOD@ 20°C for 5days and BOD@27°C for 3days
• Turbidity as NTU
• COD (Open reflux method)
• Temperature°C
• Dissolved Oxygen
• Acidity as CaCO3, mg/l
• Hexavalent Chromium as Cr6+
• Total Alkalinity as CaCO3
• Boron as B
• Phenolphthalein Alkalinity as CaCO3 or Carbonate Alkalinity as CO3
• Percent Sodium
• Methyl orange Alkalinity as CaCO3 or Bicarbonate Alkalinity as HCO3
• Residual Sodium Carbonate
• Total Hardness as CaCO3
• Sodium absorption ratio
• Calcium Hardness as CaCO3
• Cyanide as CN
• Magnesium Hardness as CaCO3
• Chloride as Cl
• Calcium as Ca
• Fluoride as F
• Magnesium as Mg
• Total Phosphorus as P
• Carbonate Hardness as CaCO3
• Dissolved Phosphorus as P
• Non –Carbonate Hardness as CaCO3
• Sulphate as SO4
• Total Solids
• Particle size of suspended solids
• Fixed Solids, mg/l
• Mixed Liquid suspended solids (MLSS)
• Volatile Solids, mg/l
• Mixed Liquid volatile suspended solids (MLVSS)
• Total Suspended Solids
• Mixed Liquid Fixed Suspended Solids (MLFSS), mg/l
• Oil & Grease
• Sludge Volume Index (SVI)
• Sodium
• Nitrate
• Potassium
• Nitrite
• Phenolic Compound
• Total Silica
• Sulphite
• Reactive Silica
• Sulphide
• Unreactive Silica
• Iron

Product Details:

What is this service?

• There are numbers of chemicals present in the air we breathe. These chemicals are harmful to our health and thus a domestic air testing is required so that you can identify these pollutants. Depending upon the test result, effective method for cleaner and healthier air is opted.

Following are the pollutants for which indoor air quality test is carried out:

• Nitrogen dioxide (NO2)
• Carbon monoxide (CO)
• Carbon dioxide (CO2)

Why it is required?

• Impure quality indoor air is very harmful for your health and can cause many diseases. In order to check the types and level of pollutants present in air, home air quality testing is carried out so that an effective and reliable method can be opted for getting a pure quality of air inside homes and offices. These testing also includes indoor air quality testing, work atmosphere testing.

Following tests are performed for Indoor Air Quality Testing:

• Sulphur dioxide
• Temperature
• Oxides of Nitrogen
• Humidity
• Ammonia
• Illumination
• Ozone
• Carbon monoxide
• Hydrogen Sulphide
• Oxygen
• Chlorine
• Carbon dioxide

Product Details:

Description:

• We GPCB Environmental Audit also provide Gujarat pollution control board services. Environmental Audit Scheme applies to all industrial units situated in Gujarat that manufacture and process specified products. The Environmental Audit Scheme classifies industries according to their products. It was introduced by the honorable high Court of Gujarat. This booklet provides information on the industries that are covered by this scheme, the objectives of setting up this scheme, the applicability of the scheme, the auditors, and reports to be submitted by the industries, complete with the dates of submitting the reports.
• Definition of Environmental Audit: It is a management tool comprising of a systematic, documented, periodic, and objective evaluation of how well the environment management systems are performing with the aim of: ¤ Waste prevention and reduction, ¤ Assessing compliance with regulatory requirements, ¤ Facilitating control of environment practices by a company management ¤ Placing environmental information in the public domain Environment Audit Committee: GPCB has constituted an expert technical committee as Environment Audit Committee from the inception of the scheme for implementation of recognition procedure for the auditor in context with the environment audit scheme and to recommend GPCB for the same. In addition to this, Environment Audit Committee provides advise/guidance/technical input related to the subject. As per the scope of work, committee members periodically visit the auditor's laboratories and advise them in this matter and will suggest/implement the new parameters which are being introduced by the CPCB/GPCB.
• The scheme was introduced with a view to: ¤ Enforcing discipline amongst the industries. ¤ Arming GPCB as well as the Associations of industries in the concerned areas with the necessary information. ¤ Doing regular monitoring of different industries scattered in the entire State of Gujarat with a perspective of environmental protection & sustainable development.

Recommendation:

• The GPCB has delineated guidelines for environmental audit to be followed by all auditors. The methodology and procedure described by the Board keeping in line with the orders of the Hon'ble high Court of Gujarat do not require major modification. However, minor modifications have been recommended, and discussed individually under each section. ¤ The guidelines are being followed by all auditors for the audit, and should be continued to be followed strictly. ¤ Random assessment of Environment Audit Reports received from Scheduled I and Schedule II auditors should be done by experts. ¤ Establishment of a separate cell for Environmental audit by the GPCB having adequate number of engineers and scientists may provide more effective implementation of this scheme. ¤ The year for audit purpose should be changed from calendar year to financial year (1st April to 31st March). The last date for submission of the audit report should within two months from the close of the financial year.

Product Details:

Noise Monitoring also we are doing machine and process validation. Environment testing like air, water, soil, ambient, noise, Vibration etc GPCB (pollution control Board) authorised environment auditor. We supply all instrument and turnkey project consultancy and instrument supply with reputed brands with highest level of quality.

Environmental noise is a major issue in most countries, especially in heavily populated or industrialised areas. Its sources and adverse effects on our wellbeing are varied and can range from sleep disturbances to increased stress levels, potentially leading to more major problems such as heart disease. In order for environmental noise monitoring to be effective you will, therefore, need to take into account a number of diverse issues by monitoring noise levels for longer periods and in a variety of different ways.

Industrial noise monitoring, for example, is a much more exact science as it involves the assessment of specific noise levels and the decision as to corresponding legislative and/or action levels. Environmental noise is very different because the level of annoyance or nuisance can be highly subjective and will elicit diverse reactions from different people.

Typical sources of environmental noise include:

• Industrial sites
• Power stations
• Construction work
• Road traffic
• Animals (e.g. dogs barking)
• Aircraft noise
• Entertainment venues

Environmental noise can also have a range of characteristics:

Continuous noise:

• Extraction fans, compressors etc.
• Road traffic
• Industrial processes

Intermittent noise:

• Transport
• Construction
• Animals
• Industrial processes

Brand Prism (PMALL)

Model PMALL 1

Application Industrial Laboratory

Product Details:

What is this service?

• There is a local area regulation and guideline for maintaining a desired ambient air quality in the work environment. In this air quality testing service, we help you in testing the quality of air and comply with the predefined standards for the ambient air quality

Required. In our ambient air quality testing service, we include:

• Dust particle pollution
• Odor monitoring and assessment
• Continuous air monitoring network
• Industrial air sampling

Why it is required?

• The ambient air quality testing is important to keep a check on the quality of air you are working in. The quality of air in the industrial environment affects the health of the workforce. If the ambient air is polluted then it can damage the building materials and reduce the overall productivity.To grow in a sustainable manner, one need to have a check on the quality of ambient air as the contaminants in the air can adversely affect the local ecosystems and biodiversity. So, we perform industrial air quality testing at industry level and office air quality testing at office level. This also includes national ambient air quality ttesting and analysis in airesting.

Following tests are performed for Ambient Air Quality Testing:

• Carbon monoxide
• Suspended Particulate matter (SPM)
• Oxygen
• Sulphur dioxide
• Carbon dioxide
• Oxides of Nitrogen
• Lead as Pb
• Ammonia
• Nickel as Ni
• Ozone
• Arsenic as As
• Fluorides
• Chromium as Cr
• Hydrogen Sulphide
• Benzene, Toluene & Xylene
• Chlorine
• Poly Aromatic Hydrocarbons (PAH) Benzo(a)Pyrene(BaP)
• Temperature
• Volatile Organic Compounds as per EPA 502/524 mix
• Humidity
• Noise
• Illumination

Product Details:

Owing to the expertise of our team of experienced professionals, we are able to introduce an exclusive range of Approved Environmental Auditing Services. Our engineering professionals provide proper and exclusive observation to the environmental activities. Also, we facilitate our clients with timely constraint services so that their production output can be increased accordingly. The services provided by us include atmosphere, humidity, heat, water pressure, and moisture level. The charges are very much nominal; therefore, clients can opt for our services immediately.

Features:

• Rendered by hassle free management
• Timely completion of work
• Work in close coordination with our clients

Applications:

• Pharmaceuticals
• Chemical
• Oil & Gas

EMS gap analysis and initial environmental reviewOur Environmental Auditors can work with organisations seeking direction with the development and implementation of an ISO 14001 environmental management system.

Some organisations complete an EMS gap analysis and initial environmental review prior to the development and implementation of an ISO 14001 environmental management system. This process assists organisations with identifying environmental aspects of its products, services and activities, as well as identifying how they will meet all the requirements of the ISO 14001 standard.

Our gap analysis audit reports can be extensively detailed to provide instructions for organisations to develop the system internally. Our Environmental Auditors can also provide mentoring assistance during the development and implementation stages as requested.

Product Details:

As an affluent name of this domain, we hold expertise in presenting high quality Environment Clearance. Our scientists opt for coastal, topography, and soil study making an allowance for the power and engineering studies. Our services also include water and wastewater treatment development designing and scientific solutions to save the natural resources. Our professionals build up air pollution control and modeling solution to avert the future generation. Clients can get in touch with us to know the reasonable price for charged by us for calibration.

Features:

• Hazardous waste generator registration
• ECC amendment or consolidation
• Environmental modeling

Applications:

• R & D Labs
• Electrical / Analytical Labs
• Colleges & Govt. Sector

Other Details:

• Environmental liaising work witch includes No Objection Certificate
• Consolidated Consent & Authorisation (CC&A).
• Environmental Audit work .
• Analysis of different parameters of Air, Water and Solid waste
• Assistance for Environmental Clearance (EC) including Environment Impact
• Assessment from state and central level.
• Environment Audit for industries under Schedule II Category.
• Designing of Effluent Treatment Plant (ETP), Sewage Treatment Plant (STP),
• Air Pollution Control Devices (APCD), Environment Management Plan (EMP).
• Approval work for license of Hazardous wastes from MoEF (Delhi).
• Waste minimization and Hazardous Waste management system.
• Operation, Maintenance and Value addition in existing treatment plant.
• Supply of Air Pollution Control Devices like Bag Filter, Dust Collecter,
• scrubber, Blowers etc...

Product Details:

Ambient air monitoring is the systematic, long-term assessment of pollutant levels by measuring the quantity and types of certain pollutants in the surrounding, outdoor air.

Product Details:

We offer Calibration Of Flow Meter, that are handled by our trained workforce. These services are widely appreciated for their reliability and accuracy. To ensure quality, our calibration is traceable to national standards with requisite certificate for parameters. Further, these are services are provided according to the requirements of the clients and at most affordable prices

A flowmeter measures the rate that fluid or gas moves through it. Test and measurement professionals use them in a wide variety of applications where accurate flow measurements are critical, including (but not limited to) HVAC, energy and utilities, water management, aerospace, agriculture and the pharmaceutical industry. In applications like these, it’s important to calibrate the flowmeters that make the measurements. Regular calibrations assure you that the flowmeter’s measurements are as accurate as their specifications say they are.

Even the most rugged flowmeters can fall out of calibration. All instruments’ performance degrades over time; parts wear out or break. Flowmeters can be affected by corrosion or dirt within the media that flows through them. They may also be damaged by impact, variations in the process, or by improper installation. Standard best practices in calibration apply to flowmeter calibration as they do for all test equipment; flow calibration also has some specific best practices to keep in mind: 1. The standard that you use to calibrate a flowmeter must be accurate enough to perform the calibration. The general rule of thumb is that your standard should be four times more accurate than the unit under test (UUT); however, this can vary depending on the requirements of the calibration.2. Your standard should be traceable to a recognized standard. Traceability provides an unbroken chain of documentation that shows how the measurements it makes compare to even more accurate standards. Traceable measurements help you prove that your measurements are what your flowmeter says they are, within specific ranges.3. The rate of flow between the UUT and the calibration standard must be in a steady state. Since the flow rate of the standard and the UUT are compared in real time during calibration, the system flow rate should not vary with time.4. All media measured by the calibration standard must also be measured by the flowmeter at the same time. In other words, there should not be any leaks or significant temperature changes in intermediary volumes that might affect the measurement.5. You should perform the calibration under conditions that are typical of the flowmeter’s actual operation. For example, the viscosity, density or heat content of the liquid being measured can affect the flowmeter based on its operating technology. It is important to match the calibration with the flowmeter’s application.

Product Details:

Feature:

* Inhouse Calibration services.
* 12 Parameter Checking and then as per Customer Requirement

Product Details:

What is this service?

• The Waste analysis report helps you in making right decision as how to use the municipal and industrial wastes and by-products as fertilizer materials for crop production.The Solid Waste Analysis method is different for solid waste and liquid waste.

Following are the parameters for which the waste is tested:

• Heavy metals
• Nickel
• Cadmium
• Lead
• Essential plant nutrients
• Nitrogen
• Potassium
• Phosphorus
• Sulfur
• Calcium
• Magnesium
• Manganese
• Zinc
• Copper
• Boron

Why it is required?

• Waste products must be disposed with sound management practices to prevent damage to our natural resources. Depending upon the source of waste and the contents present in it, an effective waste product management practice is adopted. For this, a complete testing of waste has to be carried out.This testing includes sludge testing, sludge analysis, tclp testing, toxicity leachate testing, arsenic testing, mercury testing, hg testing, lead testing, lead analysis, pb testing.

Following tests are performed for Waste Analysis:

• Fluoride
• Phenolic Compound
• Sulphide
• Cyanide
• Anionic Surface active agent as MBAS

Product Details:

What is this service?

• In soil testing, a sample is tested to determine its nutrient and contaminant content, acidity and composition. For agricultural sector, the soil is tested for its fertility, expected growth potential, potential toxicities from excessive fertility, nutrient deficiencies and inhibitions from the presence of non-essential trace minerals.The soil sample is also tested for phosphorus, potassium, magnesium and calcium.

Why it is required?

• Soil testing services, provided by our soil testing company, are required for diagnosing the health of soil according to which soil specific and crop specific solutions are evaluated. Based on these test results, farmers are advised on soil fertility management.These tests are also helpful for controlling the soil pollution and improving its fertility for increased crop yield. The soil testing includes testing of soil fertility, heavy metal in soil, toxicity in soil, soil npk, organic content in soil, soil analysis, testing for soil remediation, soil suitability, toxic metal in soil.

Following tests are performed for Soil Testing :

• Moisture
• Total Organic Carbon
• Loss on Drying @550°C
• Total Organic Matter
• pH
• Nitrate
• Conductivity
• Total Kjeldahl Nitrogen
• Volatile Substance
• Total Nitrogen
• Non Volatile Substance
• Oil & Grease
• Cation exchange capacity
• Hexavalent Chromium
• Calcium carbonate
• Sodium absorption ratio
• Carbonate and bicarbonate
• Phosphorus
• Sulphate
• Soluble Calcium
• Chloride
• Soluble Magnesium

Product Details:

What is this service?
In our water analysis services, we analyze the drinking water, industrial waste water and ground or surface water sample on various standard parameters. The water testing services determine the level of purity and pollution in the water sample.The water is sample tested for various harmful contaminants (both soluble and insoluble) in it. Surface or ground water is tested for bacteria and nitrates.For home water supplies, water sample is tested for PH value, iron, dissolved solids, manganese, nitrates, alkalinity, dissolved solids and hardness.

Why it is required?
In industries, the poor quality of water can damage the machines and deteriorate the product standard. In residential sector, the analysis of drinking water is very important as it can adversely affect your health and overall growth.The water testing includes testing of water heavy metal, effluent sample analysis, eflluent water, ro water analysis, ro water, discharge water, dye effluent testing, sea water analysis, sea water testing.

Following tests are performed for Water Analysis:

• Colour
• Caustic Alkalinity as CaCO3
• Odour
• Calcium as Ca
• Turbidity as NTU
• Magnesium as Mg
• pH Value
• Sodium as Na
• Conductivity (µmhos/cm)
• Boron as B
• Total Dissolved Solids (Inorganic)
• Ammonia as NH3
• Total Suspended Solids
• Nitrite as NO2
• Residual hydrazine as N2H4
• Nitrate as NO3
• Ratio of NaNO3 /Total alkalinity as NaOH    
• Ammoniacal Nitrogen as NH3.N
• Total Hardness as CaCO3
• COD (Open reflux method)
• Calcium Hardness as CaCO3
• Total Silica as SiO2
• Magnesium Hardness as CaCO3
• Reactive Silica as SiO2
• Carbon dioxide
• Unreactive Silica SiO2
• Total solids    
• Total Phosphorus as P
• Volatile Solids, mg/l
• Dissolved Phosphorus as P
• Fixed Solids, mg/l
• Oxygen Consumed in 4 hrs
• Oil & Grease    
• Oxygen as O2
• Dissolved Oxygen
• Oxidizable matter
• Total Iron as Fe
• Non-volatile residue
• Ferrous as Fe
• Residual Sodium Carbonate
• Sulphate as SO4
• Sodium absorption ratio
• Chloride as Cl
• Residual Na2SO3 Content
• Residual Chlorine
• Ratio of Sodium Sulphate and Caustic alkalinity
• Total Alkalinity as CaCO3     

Product Details:

What is this service?

• In these Lubricants testing services, sample of lubricant is analyzed on various parameters like,
• Viscosity
• Particle count
• Drop melting point
• Pour point
• Calorific value
• Freezing point
• Carbon residue

This type of waste & used oil testing service is applicable for all types of lubricants such as lubricants for gears, automobiles and machinery.

Why it is required?

• Lubricants are very important for most of the mechanical systems. The right quality and type of lubricant can enhance the operational life of a system remarkably.In order to make the heavy duty machines run smoothly and for long time, waste and used oil or lubricants testing is important. This testing includes fuel oil testing, lubricant oil testing, used oil testing, used lubricant testing, waste oil testing.

Following tests are performed for Waste and Used Oil / Lubricants Testing:

• Poly Chlorinated Biphenyls (PCB), as per EPA 525, 525.1 mix
• Poly Aromatic Hydrocarbons (PAH), as per EPA 610 mi

Product Details:

As a trust worthy organization of this domain, we are committed to offer our clients a superior quality assortment of Pollution Control Services. Our lab is equipped with machineries and tools and meters that measure the level of pollutants in the air. Nitrogen, carbon dioxide and other gaseous particles that harms the environment is measure and aware to the authorities. The data can be provided using txt or excel files to the clients. Clients can get in touch with us to know the reasonable price for charged by us for calibration.

Applications:

• Pollution agencies
• Oil refineries
• Coal factories and mines

Our customer comes first, therefore your need is our priority. We pride ourselves on building strong relationship with our clients to facilitate better business bonds. We are fully equipped with our fleet comprising 15 super sucker vacuumation trucks (6 inch liquid ring vacuumation units and 6 inch dry vacuumation units), water tankers, 1 bob cat , 14 high pressure units (from 750bar-1500bar pressure), an Aqua Fortis floor cleaning machine, 5 dry ice blasters, sludge pumps and vehicles. The combination of well trained staff, a professional business practice and the best equipment enables us to meet every need and situation. We pride ourselves on having been named 2010 Business of the year at the Zululand chamber of Commerce and industry Business excellence Awards, acknowledging us as the biggest dynamic business in our field.

Product Details:

Description:

• Since our inception, our firm is affianced to introduce a premium quality array of Environmental Engineering Consultants. Our engineers opt for coastal, topography, and soil study considering the power and engineering studies. Our consultants also opt for water and wastewater treatment process designing and engineering to save the natural resources. We develop air pollution control and modeling solution to prevent the future generation. Clients can get in touch with us to know the reasonable price for charged by us for calibration.

Features:

• Environmental Compliance Certificate (ECC)
• Certificate of Non-Coverage (CNC)
• Permit to Operate

Applications:

• Urban development
• Environment research
• R and D departments on pollution control

We know your job of managing environmental challenges is more demanding than ever. Meeting the technical and regulatory demands of a project and your business requires an environmental consulting firm that will match experience and knowledge with connections and communications.

our team of environmental engineers, planners, scientists and economists who will assist you with your environmental needs.

• Air Quality and Emissions Control
• Environmental Management
• Environmental Site Assessments
• Grant Application Writing
• NEPA Planning
• Noise Assessment and Mitigation
• Regulatory Compliance and Permitting
• Threatened and Endangered Species
• Water Quality
• Wetlands Delineation and Mitigation
• Wastewater Treatment

Product Details:

Product Details:

Product Details: