Lab Instruments

Product Details:

Description:

• we can supply very good quality BOD, COD, Ovens, Muffle furnaces, stirrers, hot plates etc equipments
• you can check this instruments in www.eindustries.in(kindly open in new tab) for more specifications and details and rates

Product Details:

Technical Features:

• Round Plate In M.S
• Watts : 1000
• Size Round : 8" Dia
• Hot Plate Round With Controlled By Energy Regulator
• Three Heat Switch With Indicators

Specifications:

Product Details:

Technical Features:

• Type : Pen Type
• Range : 0-14 Ph
• Resolution : 0.1 Ph
• Accuracy : +/- 0.1 Ph
• Typical Emc Dev. : +/-0.2 Ph
• Environment : 0 To 50°C , Rh 95%
• Batteries : 3*1.5 V Alkaline
• Life : Approx. 700 Hrs
• Dimension : 150 x 30 x 24 Mm
• Weight : 85 Gms

Specifications:

Product Details:

We offer Hot Air Oven with the following technical specification and features.

Technical Features:

• Type: Laboratory Type
• Working Temp.: Up To 250°C
• No. Of Sleeves: 1
• Watts: 1000
• Working Size: 12" X 12" X 12"
• Inside: M.S Chamber
• Outer: M.S Powder Coated With Thermostatic Three Heat Controlled Switch

Specifications:

Product Details:

We are the leading trader and distributor of Muffle Furnace.

Technical Features:

• Working Temp. : 0-900°C
• Max. Furnace Temp. : Up To 930°C
• Watts : 1800
• Size : 9" X 4" X 4"
• High Temp. 930°C With Digital Temp. Controller

Specifications:

Product Details:

Technical Features:

• Multi Size / Bottom Outlet
• Watts : 150
• Size : 25-250 Ml
• Temp. Range 450°C With Built In Energy Regulator
• Strong Painted Aluminum Housing
• Mantle Knitted From Fiber Glass Yarn.
• Maximum Glass Wool Insulation To Prevent Loss Of Heat.

Specifications:

Product Details:

Micro controller based
* Range : 0.1 µS – 100 mS
* Resolution : 0.001 µS
* Temperature : 00 C – 1000 C (Auto / Manual)
* Readout : 7 digits LED (3 digits for Temp. and 4 digits for Cond.)
* Printer interface for 80 Column D.M. Printer

BrandInsizeMODELISM-PM200SARANGE10X-200XDELIVERY TIME1-2 weeks

Additional Information:

• Minimum Order Quantity: 1 piece
• Production Capacity: 10X-200X
• Delivery Time: 1-2 weeks

Product Details:

We are the leading trader and distributor of Water Bath.

Product Details:

We are one of the leading wholesaler and traders of Electrical Test Bench. 

Work Table:

• Work table frame structure is made up of 40 mm powder coated mild steel square tube
• Work table top is made up of 25 mm thick chip board suitably laminated & post formed

Bench-top panel

• The bench top panel is constructed with 19 thick chip board suitably laminated
• The front plates are fixed with top and bottom profile run throughout the panel length
• The Front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes and weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outfor easyfrontal operations.
• For Others like switch, socket, MCB, etc. are mounted or fixed by fixtures as required with making suitable cut outs easyfrontal operations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identifications and troubleshooting in the future.
• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. NOrmally, PVC or Nylon Hoses are used according to the withstanding rated pressure
• Back of the panel are made up of 19 mm chip board with inserted perforated mild steel ventilator arrangement with hinge, lock and key
• The back doors are easily openable for cleaning and fault finding or any other service requirements

Under Bench Cabinet

• Trolley Type
• Under bench cabinet is made up of chip board suitably laminated and fascia
• Storage space with lockable drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items / tools and tackle, etc

Product Details:

We are one of the leading distributor and traders of Universal Test Bench. 

Work Table:

• Work table frame structure is made up of 40 mm powder coated mild steel square tube
• Work table top is made up of 25 mm thick chip board suitably laminated and post formed
• Work Table Size:- Size: 1500 x 1000 x 780 mm (LBH)

Bench-top Panel:

• The bench top panel is constructed with 19 mm thick chip board suitably laminated
• The frontplates are fixed with top and bottom profile run throughout the panel length
• The front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes and weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outs for easyfrontal operations.
• For others like switch, socket, MCB, etc. are mounted or fixed by fixtures as required with making suitable cut outs for easy frontaloperations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identications and troubleshooting in the future.
• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. Normally, PVC or Nylon hoses are used according to the withstanding rated pressure
• Back of the panel are made up of 19mm chip board with inserted perforated mild steel ventilator arrangement with hinge and lock with key
• The back doors are easily openable for cleaning and fault finding or any other service requirements
• Size: 1500 x 450 x 680 mm (LBH)

Under Bench Cabinet:

• Trolley Type
• Under bench cabinet is made up of chip board suitably laminated & fascia
• Storage space with locakble drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items/tools and tackle, 
• Under Bench Cabinet Size :- Size: 420 x 460 x 685 mm (

Product Details:

Technical Features:

• Double Walled
• Temp. Range : Up To 130°C
• Watts : 500
• Size : 22.5 * 30 Cms (9" * 12")
• Inside : S.S 304 Grade Chamber
• Supplied With Vacuum Gauge , Cock Toughed Glass Window For Observation , Dig. Temp. Controller.

Specifications:

* Screen Diameter 200mm. fine ground screen with cross line. Rotatable 0 to 360 vernier reading 2 minutes.
* Magnification 10x & 20x .
* Magnification Accuracy ± 0.1% for contour and ± 0.15% for surface.
* Work Stage Table 150x150mm. X & Y axis, Traverse 25mm in each direction having least count .01mm.
* Contour Illumination 24V – 150W Halogen Lamp. Telecentric system and sharp twin lens condenser for each magnification bright adjustment
* Surface Illumination. 12V – 50W Halogen lamp with reflector
* Power Supply220 / 240V AC., 50 / 60Hz., Fuse 5A.
* Cooling System Built in noiseless and vibration free blower for powerful cooling system.

Product Details:

Technical Features:

• Type : Heating Block Type
• Temp. Range : 150°C + 1°C
• Watts : 600
• Size : 6 Sample
• Controlled By Digital Controller With Timer

Specifications:

Product Details:

T/L/DPM/SYS/02K/001

Product Details:

Technical Features:

• M.S Body
• With Three Tube-light, Short Wave, Long Wave
• Day Light Fluorescent Tube

Specifications:

Product Details:

We are the spplier and testing service provider of  laminar air flow bench supplied with blower with motor hang by heavy spring loaded for minimum vibration & noise.

Product Details:

Product Details:

Specifications:

Diameter of PolishingDisc 200 mm
* Rotation Speed 1400 rpm
* Motor Specification 180 W
* Power Supply 1Phase/220V/50Hz
* Dimension 730 x 405 x 308 mm
* Cooling style With cooling system

digital  model

*complete with fluorecent tube, wouifftiuegel ruling counting plate & magnifying glass

*display 4 digit led

Additional Information:

• Minimum Order Quantity: 1 Unit

Product Details:

We are the reliable supplier of flame photo meter

Additional Information:

• Minimum Order Quantity: 1 Piece